הפקולטה להנדסת אווירונוטיקה וחלל בטכניון ע"ש סטיבן ב. קליין היא מרכז אקדמי ברמה עולמית לאוירונוטיקה ואסטרונאוטיקה, המוקדש ליצירה, הרחבה והפצה של רעיונות וידע במדעי התעופה והחלל.
Shavit Attar | This study demonstrates closed-loop control of the shock train leading-edge location in a dual-mode scramjet combustor using fuel-injection distribution as the control input. Experiments were performed in a direct-connect, cavity-stabilized combustor with distributed ethylene injection.
Saar Levi | Hypergolic propellants are defined by their ability to ignite immediately upon contact, resulting in rapid exothermic reactions occurring without the need for an external ignition source. In hybrid rocket engines, this spontaneous reaction simplifies thruster management, reduces system mass, and enables engine re-ignition.
Accurate pose estimation and 3D reconstruction are important in a variety of applications such as autonomous navigation or mapping in uncertain or unknown environments. Bundle adjustment (BA) and simultaneous localization...
The study and optimization of combustion processes requires precise knowledge of the temperature and species’ concentration fields. In such applications, measurements are often taken locally by intrusive techniques that affect...
A simple optimization method is proposed for multi-wire CTA probe design. The optimization computes the sensitivities to density, velocity and total temperature for each wire, based on empirical Nu –...
It is common to find aerospace structural parts which behave in a one- or two-dimensional manner. This behaviour allows us to simplify the analysis, in comparison to that which would...
Accurate pose estimation and 3D reconstruction are important in a variety of applications such as autonomous navigation or mapping in uncertain or unknown environments. Bundle adjustment (BA) and simultaneous localization...
The study and optimization of combustion processes requires precise knowledge of the temperature and species’ concentration fields. In such applications, measurements are often taken locally by intrusive techniques that affect...
A simple optimization method is proposed for multi-wire CTA probe design. The optimization computes the sensitivities to density, velocity and total temperature for each wire, based on empirical Nu –...
It is common to find aerospace structural parts which behave in a one- or two-dimensional manner. This behaviour allows us to simplify the analysis, in comparison to that which would...