Contact Us

THE STEPHEN B. KLEIN FACULTY OF |AEROSPACE ENGINEERING

Propelling the Future

Research Labs

Max and Desiree Blankfeld Endowed Prize

Graduate Studies

Industry Relations

About the |Faculty

The Stephen B. Klein Faculty of Aerospace Engineering at the Technion is a world-class academic hub for aeronautics and astronautics, dedicated to creating, expanding, and disseminating ideas and knowledge in aerospace sciences and engineering.

BE PART OF THE |AEROSPACE FUTURE

News
12.08.2026

Technion Establishes New International Prize for Transformative Innovation in Aerospace

The Max and Desiree Blankfeld Endowed Prize for Transformative Innovation in Aerospace, made possible through a generous gift from Max and Desiree Blankfeld of Houston, Texas.
11.08.2026

Congratulations! Prof. Moshe Idan Promoted to Full Professor

Professor Idan is an internationally recognized researcher whose work has made significant contributions in the areas of estimation theory, flight control systems, and air traffic management.
08.02.2026

Professor Eli Livne Awarded the 2026 Hanin International Prize

The late Prof. Meir Hanin International Prize is awarded every two years for significant scientific and/or technological achievements in aerospace sciences.
Events
September 17 2026
The event includes wind tunnel demonstrations, lectures, and lunch. Participation is free of charge, but prior registration is required.
Seminars
August 31 2026
Omer Wexler | Air-breathing hypersonic vehicles (AHVs) have the potential to revolutionize space access and high-speed global transportation. These vehicles can cruise at Mach 5 and above, making them highly attractive for many time-critical applications. Furthermore, by using atmospheric oxygen, they eliminate the need to carry oxidizers. Consequently, AHVs offer increased payload capacities, reusability, and reduced construction and operational costs.
October 05 2026
Yishai Glam | The aeroelastic stability and dynamic response of thin panels are important considerations in aerospace structures design. Traditional nonlinear Rayleigh-Ritz (RR) analysis struggles when applied to panels with nonuniform boundary conditions (BCs) or local constraints. Generating the necessary global basis functions is difficult, often leading to slow convergence and requiring many modes.
Sun
Mon
Tue
Wed
Thu
Fri
Sat
S
M
T
W
T
F
S
29
31
2
3
4
5
7
9
10
11
12
14
16
17
18
19
23
24
25
26
28
30
31
1
A major motivation for research in combustion science and technology is to reduce emissions from power plants, large scale industrial furnaces, automobiles, aircrafts, etc. Development of low emission gas turbines...
In recent years, flight vehicles are becoming progressively more elastic and as a result, aeroelastic phenomena are becoming more prominent. A gusty environment or a high-load maneuver can result in...
The purpose of the study is to develop optimal spatial guidance-laws under terminal angular constraint in atmospheric flight, which enable the pursuer to reach its target under various optimization objectives...
High flow speeds and significant compressibility levels can be found in a wide range of single- and multi-phase reacting flows. These include various propulsion and energy conversion systems, such as...
Aeroelastic responses, such as accelerations measured in flight, are non-stationary signals in which the frequency content varies with flight speed and, therefore, in time. Aeroelastic responses might also be nonlinear...
Solid propellant rocket motors are simple, easy for handling, and ready for immediate operation. That is why they are the preferred rocket motors in multiple applications and missions. However, in...
A brief overview of the Ohio State College of Engineering (COE) will be presented, with the emphasis on the strategic research pillars and the research strengths and priorities. The focus...
With increasing use of electric-powered aircraft, there is a need for accurate mission planning tools. Electric aircraft differ from conventional ones in a few aspects, most notably in the efficiency...
Subject: Futuristic Aircraft Designs and a look at how big companies develop them. Benefit: Fun and educational, aimed at the airplane enthusiast crowd. No equations or calculations, just lots of...
Many industrial and scientific applications require accurate measurement of radiation flux emitted by target surfaces. One of its most important applications is thermal infrared imaging for non-contact measurement and monitoring...
Non-Destructive Testing (NDT) is one of the major requirements in aerospace structural design. Appropriate use of NDT guarantees safety in aerospace and is thus a subject of highest attention. In this...
Events on 30/12/2019
A major motivation for research in combustion science and technology is to reduce emissions from power plants, large scale industrial furnaces, automobiles, aircrafts, etc. Development of low emission gas turbines...
Events on 01/01/2020
In recent years, flight vehicles are becoming progressively more elastic and as a result, aeroelastic phenomena are becoming more prominent. A gusty environment or a high-load maneuver can result in...
Events on 06/01/2020
The purpose of the study is to develop optimal spatial guidance-laws under terminal angular constraint in atmospheric flight, which enable the pursuer to reach its target under various optimization objectives...
Events on 08/01/2020
High flow speeds and significant compressibility levels can be found in a wide range of single- and multi-phase reacting flows. These include various propulsion and energy conversion systems, such as...
Events on 13/01/2020
Aeroelastic responses, such as accelerations measured in flight, are non-stationary signals in which the frequency content varies with flight speed and, therefore, in time. Aeroelastic responses might also be nonlinear...
Events on 15/01/2020
Solid propellant rocket motors are simple, easy for handling, and ready for immediate operation. That is why they are the preferred rocket motors in multiple applications and missions. However, in...
Events on 20/01/2020
A brief overview of the Ohio State College of Engineering (COE) will be presented, with the emphasis on the strategic research pillars and the research strengths and priorities. The focus...
Events on 21/01/2020
With increasing use of electric-powered aircraft, there is a need for accurate mission planning tools. Electric aircraft differ from conventional ones in a few aspects, most notably in the efficiency...
Events on 22/01/2020
Subject: Futuristic Aircraft Designs and a look at how big companies develop them. Benefit: Fun and educational, aimed at the airplane enthusiast crowd. No equations or calculations, just lots of...
Events on 27/01/2020
Many industrial and scientific applications require accurate measurement of radiation flux emitted by target surfaces. One of its most important applications is thermal infrared imaging for non-contact measurement and monitoring...
Events on 29/01/2020
Non-Destructive Testing (NDT) is one of the major requirements in aerospace structural design. Appropriate use of NDT guarantees safety in aerospace and is thus a subject of highest attention. In this...
  • Today
  • Event
For more info
Please fill in the details

"*" indicates required fields

This field is for validation purposes and should be left unchanged.
*required fields are marked with an asterisk