Contact Us

THE STEPHEN B. KLEIN FACULTY OF |AEROSPACE ENGINEERING

Propelling the Future

Research Labs

Max and Desiree Blankfeld Endowed Prize

Graduate Studies

Industry Relations

About the |Faculty

The Stephen B. Klein Faculty of Aerospace Engineering at the Technion is a world-class academic hub for aeronautics and astronautics, dedicated to creating, expanding, and disseminating ideas and knowledge in aerospace sciences and engineering.
FACULTY POSITIONS
GRADUATE RESEARCH OPPORTUNITIES
ADMISSION

BE PART OF THE |AEROSPACE FUTURE

News
Technion Establishes New International Prize for Transformative Innovation in Aerospace
12.08.2026

Technion Establishes New International Prize for Transformative Innovation in Aerospace

The Max and Desiree Blankfeld Endowed Prize for Transformative Innovation in Aerospace, made possible through a generous gift from Max and Desiree Blankfeld of Houston, Texas.
Read More
Congratulations! Prof. Moshe Idan Promoted to Full Professor
11.08.2026

Congratulations! Prof. Moshe Idan Promoted to Full Professor

Professor Idan is an internationally recognized researcher whose work has made significant contributions in the areas of estimation theory, flight control systems, and air traffic management.
Read More
Professor Eli Livne Awarded the 2026 Hanin International Prize
08.02.2026

Professor Eli Livne Awarded the 2026 Hanin International Prize

The late Prof. Meir Hanin International Prize is awarded every two years for significant scientific and/or technological achievements in aerospace sciences.
Read More
All News
Seminars
November 16 2026
Radar target classification using RCS characteristics
Eliezer Azoulai | This study investigates the feasibility of classifying anti-tank threats, specifically Rocket-Propelled Grenades (RPGs) and Anti-Tank Guided Missiles (ATGMs), based only on their Radar Cross Section (RCS) characteristics. A comprehensive target RCS database was constructed using electromagnetic simulations, and radar tracking scenarios were simulated to generate dynamic RCS measurements under varying Signal-to-Noise Ratio (SNR) levels and carrier frequencies of 10, 20, and 40 GHz.
Read more
All Seminars
Today
Sun
Mon
Tue
Wed
Thu
Fri
Sat
S
M
T
W
T
F
S
25
26
27
28
29
30
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
1
2
3
4
5
4D Printing: Making 3D Printing Alive
25/06/2017
4D Printing: Making 3D Printing Alive
4D printing is a novel concept that emerges in recent years, benefiting from the rapid development of advanced 3D printing technologies and active materials. In 4D printing, upon external stimuli...
The Flow Generated by an Oscillating Plate
26/06/2017
The Flow Generated by an Oscillating Plate
We study the flow generated by the periodic pitching motion of a 2D rigid plate about its fixed end in an unbounded incompressible fluid which is otherwise at rest, as...
Disturbance Source Identification for Flow Control
28/06/2017
Disturbance Source Identification for Flow Control
We present a novel approach for identifying disturbance sources in wall-bounded shear flows, which can prove useful for active control of boundary layer transition from laminar to turbulent flow. The...
A Prescriptive Model of the Conceptual Engineering Design Process Based on Parameter Analysis and C-K Theory
03/07/2017
A Prescriptive Model of the Conceptual Engineering Design Process Based on Parameter Analysis and C-K Theory
The importance of the conceptual design stage within the process of engineering design of a new product is well known. This stage is considered the most important in terms of...
Experimental Investigation of a Boron Loaded Gel Fuel Ramjet Combustor
17/07/2017
Experimental Investigation of a Boron Loaded Gel Fuel Ramjet Combustor
Nowadays there is a growing demand for improvement in rocket and air-breathing performance and safety. There is a huge potential in combining ramjet engines with gel fuel that can carry...
Development of Integrated Geometry Nozzles for Rocket Motors
19/07/2017
Development of Integrated Geometry Nozzles for Rocket Motors
Solid-propellant rocket motors for tactical missiles require low cost, low maintenance level, immediate availability and high performance. Their main goal is to supply the required thrust and impulse to the...
Cooperative Multi-Robot Belief Space Planning for Visual-Inertial Navigation and Online Sensor Calibration
26/07/2017
Cooperative Multi-Robot Belief Space Planning for Visual-Inertial Navigation and Online Sensor Calibration
High accuracy navigation in GPS-deprived uncertain environments is of prime importance to various robotics applications. In such scenarios, it has been recently shown that online sensor calibration and multi-robot collaboration,...
Bundle Adjustment with Feature Scale Constraint for Enhanced Estimation Accuracy
02/08/2017
Bundle Adjustment with Feature Scale Constraint for Enhanced Estimation Accuracy
Accurate pose estimation and 3D reconstruction are important in a variety of applications such as autonomous navigation or mapping in uncertain or unknown environments. Bundle adjustment (BA) and simultaneous localization...
Events on 25/06/2017
25/06/2017
4D Printing: Making 3D Printing Alive
4D printing is a novel concept that emerges in recent years, benefiting from the rapid development of advanced 3D printing technologies and active materials. In 4D printing, upon external stimuli...
Events on 26/06/2017
26/06/2017
The Flow Generated by an Oscillating Plate
We study the flow generated by the periodic pitching motion of a 2D rigid plate about its fixed end in an unbounded incompressible fluid which is otherwise at rest, as...
Events on 28/06/2017
28/06/2017
Disturbance Source Identification for Flow Control
We present a novel approach for identifying disturbance sources in wall-bounded shear flows, which can prove useful for active control of boundary layer transition from laminar to turbulent flow. The...
Events on 03/07/2017
03/07/2017
A Prescriptive Model of the Conceptual Engineering Design Process Based on Parameter Analysis and C-K Theory
The importance of the conceptual design stage within the process of engineering design of a new product is well known. This stage is considered the most important in terms of...
Events on 17/07/2017
17/07/2017
Experimental Investigation of a Boron Loaded Gel Fuel Ramjet Combustor
Nowadays there is a growing demand for improvement in rocket and air-breathing performance and safety. There is a huge potential in combining ramjet engines with gel fuel that can carry...
Events on 19/07/2017
19/07/2017
Development of Integrated Geometry Nozzles for Rocket Motors
Solid-propellant rocket motors for tactical missiles require low cost, low maintenance level, immediate availability and high performance. Their main goal is to supply the required thrust and impulse to the...
Events on 26/07/2017
26/07/2017
Cooperative Multi-Robot Belief Space Planning for Visual-Inertial Navigation and Online Sensor Calibration
High accuracy navigation in GPS-deprived uncertain environments is of prime importance to various robotics applications. In such scenarios, it has been recently shown that online sensor calibration and multi-robot collaboration,...
Events on 02/08/2017
02/08/2017
Bundle Adjustment with Feature Scale Constraint for Enhanced Estimation Accuracy
Accurate pose estimation and 3D reconstruction are important in a variety of applications such as autonomous navigation or mapping in uncertain or unknown environments. Bundle adjustment (BA) and simultaneous localization...
  • Today
  • Event
For more info
Please fill in the details

"*" indicates required fields

This field is for validation purposes and should be left unchanged.
Consent
*required fields are marked with an asterisk
© All rights reserved to Faculty of Aerospace Engineering
Web Development Web Development